Downloads
Contact
Enter search term or item number

Gauging Blocks

Gauging blocks are used to check the wear of the stamping jaw teeth, which should be checked at regular intervals. Clean stamping ensures constant holding forces and a consistently high clamping quality in the machining process. If the stamping jaw is worn, it can be reconditioned.

Results: 26
Product image 41010: Makro•Grip® Center Marking Tool

Item No. 41010

To product page
Product image 41010-01: Makro•Grip® Spare Stud for centre marking tool

Item No. 41010-01

To product page
Product image 41111: Makro•Grip® Stamping Jaws Standard, for materials up to 35 HRC

Item No. 41111

To product page
Product image 41111-0308: Makro•Grip® Ultra Parallels thickness 8 mm support height 3 mm

Item No. 41111-0308

To product page
Product image 41111-0508: Makro•Grip® Ultra Parallels thickness 8 mm support height 5 mm

Item No. 41111-0508

To product page
Product image 41112: Makro•Grip® Stamping Jaws High-End, for materials up to 45 HRC

Item No. 41112

To product page
Product image 41131: Makro•Grip® T-Slot Plate 496 x 596 mm

Item No. 41131

To product page
Product image 41140: Makro•Grip® Stamping Unit Additional stamping unit extended with standard stamping jaws

Item No. 41140

To product page
Product image 41140-HE: Makro•Grip® Stamping Unit Additional stamping unit extended with High-End jaws

Item No. 41140-HE

To product page
Product image 41020: Makro•Grip® Gauging Blocks for measuring wear of Stamping Jaws

Item No. 41020

To product page
Product image 41250: Makro•Grip® Pneumatic-Hydraulic Pressure Multiplier for all stamping units

Item No. 41250

To product page
Product image 41261: Makro•Grip® End-Stop for stamping unit

Item No. 41261

To product page
Product image 50111: Makro•Grip® FS Stamping Jaws Standard, for materials up to 35 HRC
New
Patent pending

Item No. 50111

To product page
Product image 51111: Makro•4Grip Stamping Jaws incl. 4 stamping inserts
Patent pending

Item No. 51111

To product page
Product image 51111-40: Makro•4Grip Stamping Inserts 4 pieces
Patent pending

Item No. 51111-40

To product page
Product image 50112: Makro•Grip® FS Stamping Jaws High-End, for materials up to 45 HRC
New
Patent pending

Item No. 50112

To product page
Product image 51260-20: Makro•Grip® FS Conversion set for previous Stamping Unit versions
New

Item No. 51260-20

To product page
Product image 50150: Makro•Grip® FS Set centering device and depth gauge
New

Item No. 50150

To product page
Product image 50151: Makro•Grip® FS Centering device
New

Item No. 50151

To product page
Product image 50152: Makro•Grip® FS Depth gauge
New

Item No. 50152

To product page
Product image 50153: Makro•Grip® FS Gauging Blocks for measuring wear of Stamping Jaws
New

Item No. 50153

To product page
Product image 53020: Makro•Grip® FS Stamping Unit Spacers
New

Item No. 53020

To product page
Product image 53261-HE: Makro•Grip® FS Stamping Unit additional Stamping Vise Standard with High-End Stamping Jaws
New
Patent pending

Item No. 53261-HE

To product page
Product image 53261: Makro•Grip® FS Stamping Unit additional Stamping Vise Standard with Standard Stamping Jaws
New
Patent pending

Item No. 53261

To product page
Product image 53411: Makro•Grip® FS Stamping Unit additional Stamping Vise extended with Standard Stamping Jaws
New
Patent pending

Item No. 53411

To product page