Downloads
Contact
Enter search term or item number

End Stop For Stamping Unit

The universal end stop is a component of all Makro•Grip® and Makro•Grip® Ultra stamping units. It ensures repeatable, centered insertion of the workpiece blanks in the stamping unit. The centered insertion during pre-stamping - optionally supported by the center marking tool - simplifies the positionally accurate clamping of the blank in the 5-Axis Vise.

Results: 27
Product image 41010: Makro•Grip® Center Marking Tool

Item No. 41010

To product page
Product image 41010-01: Makro•Grip® Spare Stud for centre marking tool

Item No. 41010-01

To product page
Product image 41111: Makro•Grip® Stamping Jaws Standard, for materials up to 35 HRC

Item No. 41111

To product page
Product image 41111-0308: Makro•Grip® Ultra Parallels thickness 8 mm support height 3 mm

Item No. 41111-0308

To product page
Product image 41111-0508: Makro•Grip® Ultra Parallels thickness 8 mm support height 5 mm

Item No. 41111-0508

To product page
Product image 41112: Makro•Grip® Stamping Jaws High-End, for materials up to 45 HRC

Item No. 41112

To product page
Product image 41112-06: Makro•Grip® Ultra Stamping Jaws High-End, without parallels, for Makro•Grip® Ultra

Item No. 41112-06

To product page
Product image 41131: Makro•Grip® T-Slot Plate 496 x 596 mm

Item No. 41131

To product page
Product image 41140: Makro•Grip® Stamping Unit Additional stamping unit extended with standard stamping jaws

Item No. 41140

To product page
Product image 41140-HE: Makro•Grip® Stamping Unit Additional stamping unit extended with High-End jaws

Item No. 41140-HE

To product page
Product image 41020: Makro•Grip® Gauging Blocks for measuring wear of Stamping Jaws

Item No. 41020

To product page
Product image 41250: Makro•Grip® Pneumatic-Hydraulic Pressure Multiplier for all stamping units

Item No. 41250

To product page
Product image 41261: Makro•Grip® End-Stop for stamping unit

Item No. 41261

To product page
Product image 50111: Makro•Grip® FS Stamping Jaws Standard, for materials up to 35 HRC
New
Patent pending

Item No. 50111

To product page
Product image 51111: Makro•4Grip Stamping Jaws incl. 4 stamping inserts
Patent pending

Item No. 51111

To product page
Product image 51111-40: Makro•4Grip Stamping Inserts 4 pieces
Patent pending

Item No. 51111-40

To product page
Product image 50112: Makro•Grip® FS Stamping Jaws High-End, for materials up to 45 HRC
New
Patent pending

Item No. 50112

To product page
Product image 51260-20: Makro•Grip® FS Conversion set for previous Stamping Unit versions
New

Item No. 51260-20

To product page
Product image 50150: Makro•Grip® FS Set centering device and depth gauge
New

Item No. 50150

To product page
Product image 50151: Makro•Grip® FS Centering device
New

Item No. 50151

To product page
Product image 50152: Makro•Grip® FS Depth gauge
New

Item No. 50152

To product page
Product image 50153: Makro•Grip® FS Gauging Blocks for measuring wear of Stamping Jaws
New

Item No. 50153

To product page
Product image 53020: Makro•Grip® FS Stamping Unit Spacers
New

Item No. 53020

To product page
Product image 53261-HE: Makro•Grip® FS Stamping Unit additional Stamping Vise Standard with High-End Stamping Jaws
New
Patent pending

Item No. 53261-HE

To product page
Product image 53261: Makro•Grip® FS Stamping Unit additional Stamping Vise Standard with Standard Stamping Jaws
New
Patent pending

Item No. 53261

To product page