Downloads
Contact
Enter search term or item number

Base Plates for Makro•Grip® Ultra

Base plates are the interface between the machine table and the Makro•Grip® Ultra workholding system, if the latter is to remain permanently on the machine table and does not necessarily have to be dismounted. The three base plates are suitable for the different lengths of the Makro•Grip® Ultra base sets.

Results: 502
Product image 30160: Clean•Tec 160 Chip Fan shaft-Ø 20 mm

Item No. 30160

To product page
Product image 30164: Clean•Tec 160 Spare Part Kit

Item No. 30164

To product page
Product image 30260: Clean•Tec 260 Chip Fan shaft-Ø 20 mm

Item No. 30260

To product page
Product image 30264: Clean•Tec 260 Spare Part Kit

Item No. 30264

To product page
Product image 30330: Clean•Tec 330 Chip Fan shaft-Ø 20 mm

Item No. 30330

To product page
Product image 30334: Clean•Tec 330 Spare Part Kit

Item No. 30334

To product page
Product image 34160: Clean•Tec 160 Chip Fan shaft-3/4"

Item No. 34160

To product page
Product image 34260: Clean•Tec 260 Chip Fan shaft-3/4"

Item No. 34260

To product page
Product image 34330: Clean•Tec 330 Chip Fan shaft-3/4"

Item No. 34330

To product page
Product image 41010: Makro•Grip® Center Marking Tool

Item No. 41010

To product page
Product image 41010-01: Makro•Grip® Spare Stud for centre marking tool

Item No. 41010-01

To product page
Product image 41111: Makro•Grip® Stamping Jaws Standard, for materials up to 35 HRC

Item No. 41111

To product page
Product image 41111-0308: Makro•Grip® Ultra Parallels thickness 8 mm support height 3 mm

Item No. 41111-0308

To product page
Product image 41111-0508: Makro•Grip® Ultra Parallels thickness 8 mm support height 5 mm

Item No. 41111-0508

To product page
Product image 41112: Makro•Grip® Stamping Jaws High-End, for materials up to 45 HRC

Item No. 41112

To product page
Product image 41112-06: Makro•Grip® Ultra Stamping Jaws High-End, without parallels, for Makro•Grip® Ultra

Item No. 41112-06

To product page
Product image 41131: Makro•Grip® T-Slot Plate 496 x 596 mm

Item No. 41131

To product page
Product image 41140: Makro•Grip® Stamping Unit Additional stamping unit extended with standard stamping jaws

Item No. 41140

To product page
Product image 41140-HE: Makro•Grip® Stamping Unit Additional stamping unit extended with High-End jaws

Item No. 41140-HE

To product page
Product image 41020: Makro•Grip® Gauging Blocks for measuring wear of Stamping Jaws

Item No. 41020

To product page
Product image 41200: Makro•Grip® Stamping Unit Standard, with standard stamping jaws

Item No. 41200

To product page
Product image 41200-HE: Makro•Grip® Stamping Unit Standard, with High-End stamping jaws

Item No. 41200-HE

To product page
Product image 41250: Makro•Grip® Pneumatic-Hydraulic Pressure Multiplier for all stamping units

Item No. 41250

To product page
Product image 41261: Makro•Grip® End-Stop for stamping unit

Item No. 41261

To product page
Product image 41032: Preci•Point 52 Collet Chuck for ER 32 collets clamping range Ø 3 - 20 mm

Item No. 41032

To product page