Skip to main content

Makro•Grip®, Stamping Unit Extended, with standard stamping jaws Item No. 41350

This version of the stamping unit is supplied with a conversion set (item no. 51260-20) consisting of a fixed and movable carrier jaw and our new Makro•Grip® FS stamping jaws (item no. 50111). For everyday use, you do not need to pay any further attention and can pre-stamp your blanks as usual.

Extended, with standard stamping jaws
Standard, with standard stamping jaws Standard, with High-End stamping jaws Extended, with standard stamping jaws Extended, with High-End stamping jaws

Address

Lang Technovation Co.
1020 James Dr., Suite I
73271 Hartland, WI 53029

Key data at a glance

The extended stamping unit for the workbench is equipped with standard stamping jaws for materials up to 35 HRC. In this version, workpiece blanks up to 355 mm clamping length can be stamped. Quick adjustment of the clamping length is possible as soon as the two locking pins are removed from the system body. Fine adjustment to the corresponding workpiece width is made via a spindle. An adjusting wheel on the hydraulic housing of the stamping unit trolley is used to set the stamping pressure continuously up to a maximum of 360 bar. The stamping process is triggered by a pneumatic pedal that can be operated by hand or foot. The scope of delivery includes a protective shield and a scaled end stop for the central, repeatable insertion of the blanks.

Pneumatic-hydraulic pressure multiplier inclusive
Yes
Max. stamping width
355 mm (13.98")
Max. stamping pressure
360 bar
For materials
up to 35 HRC
Packaging Unit
1 Set
Weight
77 kg (169.76 lbs)
Material
Steel
Notice:
Scope of delivery:

Makro•Grip® Stamping Technology and Raw Part Clamping

The Makro•Grip® 5-Axis Vise and its unique benefits of the stamping technology has been considered „The Original“ and a benchmark in the 5-face machining of raw parts for years. Its compact design and high holding forces make the Makro•Grip® 5-Axis Vise the ideal clamping device for machining raw parts.

  • Holding force Thanks to the form-fit clamping principle, highest holding forces can be achieved with Makro•Grip®, even at low clamping pressure.
  • Process reliability Clamping with Makro•Grip® provides maximum process reliability and is easy on the workpiece to be processes at the same time.
  • Accessibility The compact Makro•Grip® self-centering vises guarantee ideal accessibility in the 5-axis machining of raw parts.

Learn all about the benefits and functionality of ourMakro•Grip® Raw Part Clamping and Stamping Technology.

Discover now

Downloads

CAD models
Data sheet
Hydraulic Oil HLP 32

Makro•Grip® Raw Part Clamping and Stamping Technology

Discover now:

Clamping parts by form-fit – For years the Makro•Grip® technology has been the benchmark in the 5-axis machining of raw material.

Learn more
Makro•Grip® Raw Part Clamping and Stamping Technology